vi
Before Starting to Use
This section explains precautions you have to observe when using the machine.
Location for Installation
!
!
!
!
The location for installation is determined based on consultation with the customer at the time of delivery.
!
!
!
!
Contact your service representative before moving the machine.
!
!
!
!
Avoid installing the machine in the locations listed below. Failure to observe this precaution may lead to machine failure or
human injury.
• Locations that are subject to sudden temperature change.
• Extremely hot and humid locations or cold and dry locations
• Heated locations or locations to exposed to direct cold air, direct hot air, or direct radiant heat
• Badly ventilated locations
• Dusty locations
• Locations that are subject to frequent vibration
Operation Environment
!
!
!
!
Install the machine in a location of which the levelness meets the following conditions.
Front to rear: 3 mm (
1
/
8
") or less
Side to side: 3 mm (
1
/
8
") or less
!
!
!
!
Appropriate environment conditions are shown below.
Temperature range: 15°C - 30°C (59°F to 86°F)
Humidity range: 40% - 70%(noncondensing)
Overall Dimensions
Space for extending the Booklet tray is required.
The dimensions are expressed in mm.
Dimensions of HC full system (mm)
*:The optional touch panel display is not included.
Width
Depth
Height (*)
Remarks
Normal state
2,633
743
1,165
End of Standard Feed Tray to end of Booklet tray
Extended state
2,633
1,278
1,335
For opening/closing Paper Feed Tray on the stand
and ink cover
Содержание HC5500T
