6
Stapler
Up to 100 sheets can be stapled at a specified position.
The initial setting is [OFF].
For the paper size and setting orientation, refer to
#
p.10
Stapled prints are output to the Stacking Tray.
"
"
"
"
Paper Types That Can Be Used for Stapling
• Paper size and setting orientation:
• Paper weight: 46g/m
2
- 210g/m
2
(12-lb bond to 56-lb bond) (60g/m
2
to 220g/m
2
[16-lb bond to 58.7-lb bond] for cover
sheet)
"
"
"
"
Maximum Number of Sheets for Stapling
• For A4, A4-R, B5-R, letter, and letter-R: 2 to 100 sheets
• For standard sizes other than those above: 2 to 65 sheets
• If the number of sheets exceeds the maximum number for stapling, printed sheets are output to the Stacking Tray without sta-
pling.
• For paper shown below, the maximum number for stapling is 2 to 65 sheets.
- Paper with width in the paper ejection direction of 216 mm (8
1
/
2
") or more
- Paper larger than the size of 297 mm (11
11
/
16
") long and 216 mm (8
1
/
2
") wide
Содержание HC5500T
