17
1
1
Prepare data to be printed.
2
Display the [Print] dialog box.
Select [Print] from the [File] menu.
3
Enter the Number of copies and click
the [Properties] button.
!
Be sure to clear the checkmark from [Col-
late].
Set the ejection mode on the [Main setting]
tab.
4
Set the following items on the [Fin-
isher] tab.
• Stapler: Left top 1 position
• Offset output: ON
5
Click the [Details] button for [Stapler]
and set the following items if you
need.
• Put binding margin: Place a checkmark.
• Binding margin width: 10 mm (
3
/
8
")
• Auto reducing: Place a checkmark.
6
Perform printing.
Stapled prints are output into the Stacking Tray.
Since the prints are offset for each set, classification is
easy.
Содержание HC5500T
