43
2
Staples Run Out
When staples run out, printing stops and a message appears in the printer display. Check the message and insert new staples using
the following procedure.
For Stapler Cartridge UR1
1
Open the cover.
2
Hold the handle of the cartridge and
pull it to the front and up a little.
3
Press the points indicated by the
arrows (1) to flip open the cover of the
cartridge (2) and remove the staple
case (3).
4
Insert a new staple case into the car-
tridge.
5
Remove the sealing tape from the sta-
ple case.
6
Close the cover of the cartridge.
Содержание HC5500T
