12 -
RANGER
- rev.00
GB
Assembly instructions - RANGER 500
9 - After positioning the bollard inside the case, remove the lifting eyebolts. Using the
dowels, adjust the level positioning of the bollard with respect to the floor, checking it with
a spirit level.
Please check the distance between the flange and the ground level , it has to be 20-22mm.
In this way the flange will remain at 2-3mm from the ground level avoiding infiltration of
dust/sand into the bollard seat.
See figures alongside.
8- Use three eyebolts with M16 studs to lift the bollard.
See figures alongside.
7- Before installing the bollard, remove the plug and clean carefully the seat of the bollard,
shown in the drawing with grey colour.
23/24 mm
1/2 mm
23/24 mm
1/2 mm
