Page 5
VIS300C InSpec User Guide
Hardware Overview
Variants
The VIS300C has three different variants with different part numbers. These each target a different
market and you should consider which unit meets your requirements.
Variant One VIS300C
The VIS300C Base model is an inspection-only device. This model is ideal for users who need a field-
viewing device for fiber connectors or who need to inspect, grade, and save many fiber connector
images very quickly.
Variant Two VIS300C-PM-02-V
The VIS30)C-PM-02-V is an all-in-one test and inspection system. An on-board optical power meter
(OPM) and visual fault locator(VFL) bring extra functionality to the device. The InGaas detector in the
power meter on this model makes it ideal for most users who need to test dB loss on single mode
and multi-mode fiber at test sites, such as on cell towers and in central office settings. The red laser in
the VFL provides fault detection and continuity testing on fiber runs up to 5 km.
Variant Three VIS300C-PM-04-V
The VIS300C-PM-04-V is an all-in-one test and inspection system. An on-board OPM and VFL bring
extr functionality to the device. The filtered InGaAs detector in the power meter on this model makes
it ideal for users who need to test the output of high-powered transmit equipment at remote sites,
such as at the ONT or OLT for FTTH applications. The red laser in the VFL provides fault detection and
continuity testing on fiber runs up to 5km.
VIS300C Variant Summary
Part Number
Functions
Common Uses
Adapters/Accessories included Hardware Notes
VIS300C
•
Base Model
•
Automatic Analysis
•
Report Generation
•
Inspection only jobs
•
1.25 mm Inspection Tip
•
2.5 mm Inspection Tip
•
LC Bulkhead Inspection Tip
•
SC Bulkhead Inspection Tip
•
Comes with a VIS400 that is
compatible with the Desk
-
top InSpec software aswell.
•
5" touch screen monitor
housed in a protective case.
VIS300C-PM-02-V
•
Automatic Analyosis
•
Low Power OPM
•
Visual Fault Locator
•
Report Generation
•
Fiber to the antenna
•
Central office
•
1.25 mm Inspection Tip
•
2.5 mm Inspection Tip
•
LC Bulkhead Inspection Tip
•
SC Bulkhead Inspection Tip
•
2.5 mm OPM Adapter
•
2.5 mm VFL port
•
Comes with a VIS400 that is
compatible with the Desk
-
top InSpec software aswell.
•
5" touch screen monitor
housed in a protective case.
•
-2 indicates a InGaAs detec
-
tor in the opm which gives
a measurement range of +6
to -60 dbm.
•
The VFL is a 635nm visible
red laser.
VIS300C-PM-04-V
•
Automatic Analysis
•
Higher Power OPM
•
Visual Fault Locator
•
Report Generation
•
Fiber to the home
•
Cable TV
•
Fiber to the premises
•
1.25 mm Inspection Tip
•
2.5 mm Inspection Tip
•
LC Bulkhead Inspection Tip
•
SC Bulkhead Inspection Tip
•
2.5 mm OPM Adapter
•
2.5 mm VFL port
•
Comes with a VIS400 that is
compatible with the Desk
-
top InSpec software aswell.
•
5" touch screen monitor
housed in a protective case.
•
-04 indicates a filtered
InGaAs detector in OPM
Measurement range of
Filtered InGaAs detector is
+23 to -40 dbm
•
The VFL is a 635nm visible
red laser.
