Page 7
VIS300C InSpec User Guide
7).The battery Indicator LED will change colors to inform the user when the battery reaches certain
8).
Powering the Unit on:
With the VIS300C unit powered OFF, pressing the power button once will turn the unit ON. The
VIS300C will emit a beep and turn on the Battery Indicator LED to indicate that it is powering on.
Putting the Unit to sleep:
With the VIS300C fully powered on, press the Power button briefly to put the unit to sleep. while
sleeping the battery indicator LED will remain lit and the screen will turn off. the unit cannot be
powered off while in sleep mode.
Wakeing the unit:
With the VIS300C asleep , press the power butto n briefly to return the unit to its full functionality.
Hard Shutdown: Pressing and holding the Power button for 6-10 seconds in any staate will initiate
a hard shutdown. the unit will beep twice to indicate that it is turning off then the LED,LCD,and any
scope/power meter, and the unit will be turned off fully.
Battery LED States
Green
100% to 31% Battery Remaining
Orange 30% to 11% Battery Remaining
Red
10% to 0% Battery Remaining
Analyze Button
On the side of the VIS400 is a hardware
button that will attempt to analyze the
image currently displayed in the software.
USB Cable
The USB cable is used to
connect to the VIS300C or a
windows PC
Connector Adapter
The VIS400 comes with a universal
2.5 adapter by default, however
additional adapters are available
and are user replaceable.
Focus Ring
Spinning this ring clockwise focuses toward
the fiber while counter clockwise moves
towards the users hand.
VIS400 Overview
The VIS400 is a manual focus, automatic analysis, wired probe designed to be used with the Windows,
linux, and the VIS300C
Introduction
To connect the VIS400 to the VIS300C simply navigate to the home page and plug the USB cable into
the side of the unit. Once plugged in the VIS300C will detect the probe and begin showing a live view
of the scope.
