Page 6
VIS300C InSpec User Guide
1). The VFL Port (Available on the VIS300C-PM-02-V and VIS300C-PM-04-V) provides the physicial
interface for connecting fiber jumpers to the VIS300C for the purposes of fault detection and
continuity testing. the 2.5mm universal interface allows for direct connection of fibers to the 635nm 1
mW red laser.
2).The Power meter port avaialble on the -02 and -04 models provides a physical interface for
connecting patch cord jumpers to the VIS300C for the purpose of measuring the absolute or relative
optical power pressent. The OPm has user replaceable adapters for many different fiber types
including universal 2.5mm and 1.25mm adapters.
3).The Micro USB Port provides an interface for transferring data from the VIS300C to a compatible
Windows PC.
4).The full color touch senesitive LCD on the VIS300C provides the user interface for most of the units
functions.
5).The USB port on the side is used to plug in an inspection probe like the VIS400, an power meter like
a UPM100, or a Flash drive to offload reports/projects.
6).The VIS300C comes with a 12.6 volt Lithium-Ion wall charger.
to charge the VIS300C betewan uses, plug the wall charger into an outlet and plug the charging
adapter into the battery charger port on the side of the VIS300C. The indicator light on the wall
charger will be red when chaging and green when fully charged. charge time is approximately three
hours.
Only the approved charger from ODM may be used to charge the VIS30)C. use of any third party wall
charger will void the warranty on the VIS30)C. use of non approved chargers may cause personal or
property damage. Contact ODM to obtain approved replacement chargers.
3
2
1
5
6
7 8
4
