Page 13
VIS300C InSpec User Guide
2
1
3
7
6
1).Here you can see all cores available and which one is currently being saved.
2).Here you can enter what you want the image to be named. there is a 64 character limit to names
and not all symbols are usable. In general you should only use a-z, 0-1, spaces, and basic symbols).
3).This is an optional comment entry. This is limite to 255 characters and has the same naming
restriction as the name entry above.
4).Previous core will select the previous core on the left.
5). Next Core will select the next core on the right.
6).Done will finish saving and return to the home page. Before returning make sure you save all cores.
7).Save will save the selected core's image with the name and comment entered. after a save it will
automatically move to the next core.
Multi Fiber Save Page
4
5
