Page 14
VIS300C InSpec User Guide
Color Code Creation
First go the the OPM Page, Then the OPM Settings Page, and press the Edit button in the bottom
right. Next either select an existing color code you want to edit or the create button in the bottom
left.
1
2
4
5
6
8
3
9
10 11
12
7
1).Pressing back will return to the previous page without saving changes.
2).Here you are required to enter a name for the color code. all color codes must have a unique name.
3).Pressing any of the "X" buttons will delete that color code segment.
4).The Sector entry is one of the 4 user customizable entries for each color code.
5).The Group entry is one of the 4 user customizable entries for each color code.
6).The Fiber entry is one of the 4 user customizable entries for each color code.
7).The Core entry is one of the 4 user customizable entries for each color code.
8).Save will save all changes made and return to the settings page once finished.
9).This button will move the selected segment up an index unless it is already the top most segment.
10).This button will add a segment with the entered information to the bottom of the color code.
11).When pressed this button will move the selected segment down an index unless it is already at
the bottom.
12).Here all of your segments will be displayed allowing you to select, delete, and move segments
around.
