100763_M
19
Operate the Rimage 2000i
Center the Image on the Disc
The Rimage 2000i provides two ways to center the image on the disc. You can use the
Auto Centering
method or the
Manual
Centering
method. The following procedure describes both methods. The Auto Centering method is accurate to /- 0.5
mm. You can improve the centering position accuracy with the Manual Centering adjustment to better than +/- 0.2 mm.
Tip:
Use the
Center Image
functionality only if the printed image is not centered on the disc. Image centering is set by the
manufacturer and usually does not need to be recalibrated in the field.
For optimal print quality, use the following procedure to center the image on the disc.
1.
Access Printing Preferences
. Refer to page 15.
2. Press . The printer tray opens.
3. Place a
120 mm white disc
(Qty. 1) on the tray.
4. On the
Service
tab, select
Service ToolBox
. The
Service ToolBox
dialog box opens.
5. Select
Center Image
. The
Centering Margins for Disc Color Printer 480i
dialog box opens.
6. Follow the
onscreen instructions
to use either the
Auto Centering
or the
Manual Centering
method.
7. When the image is centered, select
OK
. The
Centering Margins for Disc Color Printer 480i
dialog box closes.
8. Select
OK
. The
Rimage Service ToolBox
dialog box closes.
9. Select
OK
. The
Preferences
window closes.
10. Press . The printer tray closes.
Check the Ink Levels
This functionality allows you to check the current levels of ink in the cartridges.
Tip:
If you remove the ink cartridges and reinsert them, the system resets to show that the cartridges are full, regardless
of the actual fill status.
1.
Access Printing Preferences.
Refer to page 15.
2. On the
Service
tab, select
Service ToolBox
. The
Service ToolBox
dialog box opens.
3. Select
Get Ink Level
. Ink level information displays in the
PrinternStatus
field.
4. Select
OK
. The
Rimage Service ToolBox
dialog box closes.
5. Select
OK
. The
Preferences
window closes.
E
ng
lis
h
E
ng
lis
h
