Rigol DG4062, Руководство пользователя

Страница: 117 / 238

Chapter 5 Modulated Waveform Output RIGOL
DG4000 User's Guide
5-25
To Select the Modulating Waveform Source
QPSK uses internal modulation source. Press Data Source to select PN15 or PN21
and the default is PN15.
To Set the QPSK Rate
QPSK uses internal modulation source. Press Rate to set the frequency at which
the output phase shifts between "carrier phase" and "modulating phase".

Use the numeric keyboard or direction keys and knob to input the desired
frequency value.

The frequency range is from 2mHz to 1MHz and the default is 100Hz.
To Set the QPSK Phases
QPSK phases are the modulating phases. Press Phase1, Phase2 and Phase3 to
set the modulating phases respectively.

Use the numeric keyboard or direction keys and knob to input the desired
phase value.

The phase range is from 0º to 360º and the default values of
Phase1,
Phase2 and Phase3 are 450º, 135º and 225º respectively.