17 |
Page Rigel Medical
SP-SIM
user Manual V2.2
To go back to the previous menu, highlight the test using the Up & Down arrow keys
and press the
button (F3)
To modify an individual test, highlight the test using the Up & Down arrow keys and
press the
Button (F4)
4.1.3. Edit individual Test
Press the
button (F4) as shown above. The SPO2 sub menu will allow you to
set the SPO2 simulation mode. This is only required once in the whole sequence.
Open the drop down box using the arrow keys and select the required SPO2 setting.
When the right settings have been achieved, press the
button (F4) to save the
changes or press
(F3) to return to the previous menu without changes.
Now scroll down to the next entry to set the parameters for the simulation by
highlighting the “SPO2 Start Simulation” from the screen as shown below;
