47 |
Page Rigel Medical
SP-SIM
user Manual V2.2
Following the confirmation that the alarm did activate at 85%, press the
(F4) to
end the test.
Pressing the
(STOP) button (F3) during any test will bring up the failure menu
(see 6.1.1)
At the end of the test, the user has the ability to enter comments. See 4.3.3 for more
information on how to activiate comments after a test.
Press the
button (F4) to store the comments.
Depending on the settings in Menu - Setup - System Config (see 4.3.2) , a number of
After Test options are possible;
New Test
–
Automatically brings up the next test screen.
No further options or viewing of results available
Download
–
Automatically down loads the test results to the PC (see 7.1)
No further options or viewing of results available. The tester will return to the
home screen.
Print Label
–
Automatically prints the test results to a thermal printer.
No further options or viewing of results available. The tester will return to the
home screen.
Test ‘n Tag
–
Aut
omatically prints a Test ‘n Tag label. (see
4.2)
