6
Basic item (small: E930)
Main board
Trunk laterals
Figure 6a:
Laterals (A) ship in reverse
position.
Figure 6b:
To reposition laterals:
• Loosen knobs (C) and slide blocks out
from under the clamp.
• Rotate blocks into correct position and
replace them under the clamp.
• Retighten knobs.
Use knobs (C) to adjust the blocks
laterally and vertically, and to pivot them
approximately 30°.
Make sure laterals are clear of tray when
adjusting board angle.
Support straps
Figures 6a and 6b:
To reposition support
straps (B):
• Loosen knobs (D).
• Slide straps up or down.
• Retighten knobs.
Board positioning
Figure 6b:
The main board, kneeboard, and
footboard slide independently on a tubular
steel track, clamping with knob (E).
Board tilt
Figure 6c:
The angle of the board is
controlled by a handcrank (F). This sets
the board at any angle from horizontal to
vertical. Adjustments can take place at any
time once the user is secure.
The board position indicator (G) is a direct
angle indicator that is attached at the
pivot point.
Figure 6a. Main board of E930 Prone Stander.
Figure 6b
C
D
G
F
E
Figure 6c
A
A
B
B
