12
Figure 12a
Accessories
Abductors
Round abductor
Figure 12a:
To attach the round abductor,
remove the knob and place abductor where
appropriate. Retighten knobs securely.
Depending on the need of the user, the
positioning of the abductor will vary. Check
the range of adjustment before positioning
the user.
Collar for round abductor
Figure 12b:
To attach the collar to the
round abductor, wrap around and fasten
snaps.
Knee laterals
Figure 12c:
Attach the knee blocks by
removing knobs (E) and tightening behind
board, with washer between knob and
board.
Knee blocks can be repositioned using
knobs (E).
Adjustable abduction wedge
(see page 13)
Figure 12d:
To attach the adjustable
abduction wedge to the Stander, remove
the knob and one washer off each
threaded stud. Place the abduction wedge
in the appropriate slot with one washer on
each threaded stud between the abduction
wedge and the Prone Stander. Replace
washers and knobs on the threaded studs
underneath board and tighten securely.
To adjust the width of abduction, raise
one wing of the wedge to expose the
adjustment screw (A). Turn screw out to
increase abduction. Raise the second wing
and adjust it in the same way.
Figure 12b
Figure 12d
A
A
E
E
Figure 12c
