16
Sandals and wedges
Attaching sandals:
Figure 11a:
1. Remove washers and knobs (C) from
sandal. Insert bolts through slots in
footboard.
2. Replace washers and knobs and
tighten securely (C).
To adjust sandals:
Figure 11a:
1. Loosen the knobs (C).
2. Move the sandals to the desired
position.
3. Retighten the knobs.
4. The sandal height can be built up, or a
toe/heel angle achieved, by using one or
more wedges.
Adding sandal wedges:
Figure 11b:
1. Unlatch white the latch (D) and remove
the sandal from the base.
2. Place the wedge over the base and latch
it into place. Any number of wedges can
be added.
3. Put the sandal on top, and latch it.
Figure 11b
C
C
Figure 11a
D
D
