Wheel diameter measuring gauge, IDK-BT
IDK-BT [Revision 2.2] 4
th
September 2017
31
20. Annex 2.
RIFTEK’s measurement devices for
railway transport
Laser wheel profilometer. IKP Series
A laser profilometer is designed for the measuring of:
wheel flange height;
wheel flange thickness;
wheel flange slope;
full profile scanning and analyze of wheel rolling surface;
maintaining of electronic wear data base;
control of tolerances and sorting in the course of checkup,
examination, repair and formation of railway wheel sets;
Measurements are made directly on rolling stock without
wheel set roll-out.
Portable laser rail profilometer. PRP Series
The main functions of PRP are:
obtaining the information on the cross-section profile
of the working railhead surface;
full profile scanning and analyze of the railhead act-
ing face;
visualization of the combined graphical images of
actual and new cross-section railhead profiles on the dis-
play of system unit.
Wheel diameter measuring gauge. IDK Series
Electronic gauge is designed for measuring wheel rolling cir-
cle diameter of railway, metro and tram wheel sets.
Measurements are made directly on rolling stock without
wheel set roll-out.
Back-to-back distance measuring gauge. IMR Series
Gauge is designed for contactless measuring of back-to-back
distance of railway, metro and tram wheels in the course of
checkup, examination, repair and formation of wheel sets.
Measurements are made directly on rolling stock without
wheel set roll-out.
Back-to-back distance measuring gauge. IMR-L Series
Gauge is designed for contactless measuring of back-to-back
distance of railway, metro and tram wheels in the course of
checkup, examination, repair and formation of wheel sets.
Measurements are made directly on rolling stock without
wheel set roll-out.
