Riftek IDK-BT Series, Руководство пользователя

Страница: 23 / 32

Wheel diameter measuring gauge, IDK-BT
IDK-BT [Revision 2.2] 4
th
September 2017
23
14.2. IDK-PC connection

turn the gauge ON

install connection between the gauge and PC as described in par. 18 .

select required port

press Connect fro connection with the gauge

If the connection is successful, the Measurement button in the main program
window becomes active. You can begin to measure
- diameter measurement;
-
reset averaging result (on the screen “
-----
”);
14.3. Measurement

place the gauge onto the wheel

make sure the ball supports are tight against the roll surface and side sup-
ports are adjacent to the edge of the wheel;

press Measure button; in a 1 second display shows result of measurement