Wheel diameter measuring gauge, IDK-BT
IDK-BT [Revision 2.2] 4
th
September 2017
24
to continue measurement with averaging press
Measure
button
display shows the value of pressing counter “
n x
”, where
x
– quantity of av-
eraged values;
in a 1 second display shows an average value over the set of metering (over
the quantity of
Green
button pressings)
move the gauge to a new position and repeat the measuring.
Press
Red
button to reset averaging result at switching to another wheel.
15. Database maintenance software
The
ikp5_DB
software is intended for maintaining wheel sets wear database on
a personal computer (the updated version of the program can be downloaded from
www.riftek.com/resouce/files/ikp5.zip
User's manual - from this address:
www.riftek.com/resource/download/ikpm_riftek_eng.pdf
16. Charging of built-in accumulator battery
To charge accumulator battery it is necessary to connect charging devise to the
power grid 85-250V and to a battery compartment on the top panel of the gauge.
The period of charging is 15 hours.
17. Warranty policy
Warranty assurance for the Wheel diameter gauge - 24 months from the date of
putting in operation; warranty shelf-life - 12 months.
18. Annex 1. Procedure of installation of Bluetooth
connection between IDK and PC
To install Bluetooth-connection between the IDK and PC, it is necessary to:
insert USB/Bluetooth-module to PC USB-port.
continue installation of the equipment following instructions of the wiz-
ard by selecting successively:
