Riello FAMILY KI, Инструкция пользователя

Страница: 36 / 40

USER
36
Scenario B
the RESET icon will appear along with a dif-
ferent alarm code, together with the .
In this case, proceed as described in point
3.
2 Displaying just the RESET icon
Press the key to reset the operation.
If the boiler performs the firing proce-
dure and resumes normal operation,
the stoppage can be attributed to a
chance situation.
Repeated lockouts require the intervention
of the r Technical Assistance Centre
3 Displaying the RESET icons and
requires the intervention of the r
Technical Assistance Centre
Scenario B - temporary fault
Scenario B - definitive fault
Fault on the domestic hot water circuit
probe -60.
The fault code is only displayed in standby.
Fault J0-J1 (faults regarding connections to
the board) requires the intervention of the
r Technical Assistance Centre
1.21 Faults
Only the icon lights up, and the alarm
code appears:
TEMPORARY FAULTS
CODE DESCRIPTION
41 Insufficient system pressure
60 Domestic hot water probe
71 Primary probe
77 Low temperature thermostat
For the “insufficient system pressure”
fault, carry out the system filling oper-
ations described in the "Special Func-
tions" chapter.
The RESET icons light up, and the alarm
code appears:
RESETTABLE FAULTS PRESS THE RESET BUTTON
CODE DESCRIPTION
10 Parasite flame
20 Limit thermostat
40 Insufficient system pressure
The RESET icons light up, and the
alarm code appears:
CALL THE TECHNICAL SERVICE
CODE DESCRIPTION
11 Parasite flame
22 Flue gas thermostat probe
42 Water pressure transducer
50-59 Electronic card
J0
No connection between the in-
terface and the main card
J1
No connection with remote
control