Riello FAMILY KI, Инструкция пользователя

Страница: 29 / 40

USER
29
A -
ENCODER
− The two digits will no longer show
the temperature measured instan-
taneously by the probe, but the
temperature (flashing) previously
set.
− By rotating the encoder A,you can
raise or lower the temperature.
− When 3 seconds have passed since
the last modification, the value is
automatically stored and the dis-
play again shows the value meas-
ured instantaneously by the probe.
− The set temperature is shown both
numerically (e.g. 40°C) and via the
illumination of the comet.
A -
ENCODER
− The segment lit up in the heating
comet will rise or fall.
− The correction range is between -
5 and + 5 comfort levels.
These corrections are very important in
the mid-seasons, when the value calcu-
lated by the curve may be too low and the
room heating time therefore too long.
When 3 seconds have passed since the
last modification, the value is automati-
cally stored and the display again shows
the value measured instantaneously by
the probe.
1.7 Adjusting the domestic hot
water temperature
To adjust the temperature of the domes-
tic hot water, just press the key