Riello FAMILY KI, Инструкция пользователя

Страница: 35 / 40

USER
35
1.18 Display and fault codes
After positioning the main system switch
“ON”, if the boiler does not start up this
means there is no electricity supply.
Check that:
− the power supply plug of the ap-
pliance, if present, is correctly in-
serted
− the main system switch is posi-
tioned on “ON”
9
If the switch-on operation is still un-
successful, contact the r Technical
Assistance Centre
1.19 Faults shown on the display
When there is an operation fault, the
display shows a flashing code and the
RESET and icons (simultaneously or
otherwise).
For a description of the faults see pages
19/29.
1.20 Resetting the faults
Wait about 10 seconds before resetting
normal operating conditions,.
Then proceed as follows:
1 Displaying only the icon
The appearance of the indicates
that an operation fault has been di-
agnosed and the boiler will attempt
to resolve it autonomously (tempo-
rary stop).
If the boiler does not resume normal oper-
ation, there are two possible display sce-
narios:
Scenario A
disappears, and the RESET icon appears
along with a different alarm code.
In this case, proceed as described in
point 2.
Scenario A - automatic reset in progress
Scenario A - definitive fault