Riello FAMILY KI, Инструкция пользователя

Страница: 27 / 40

USER
27
− Press the key and turn the en-
coder to select the required tem-
perature.
A -
ENCODER
− The large digits will light up on the
display, indicating the selected
temperature value.
− After a few seconds, the display
will again show the outlet tem-
perature actually measured by the
boiler probe.
− Press the key to select the
type of operation.
− Depending on the type of op-
eration chosen, the display will
visualise just the domestic water
comet (heating function deacti-
vated) or both comets (heating
function activated).
− The following conditions may oc-
cur: if there is no heat request,
the boiler will be in "stand-by",
if there is a heat request the boil-
er starts up and one of the flames
will light up (depending on the
type of request).
− The display indicates the temper-
ature in the boiler, or the temper-
ature of the domestic hot water if
the firing is due to a domestic wa-
ter request.
− The FAMILY boiler will continue op-
erating until the set temperatures
are reached, after which it will go
into stand-by.
− If there are any firing or opera-
tion faults, the boiler will make
a “safety stop”; the display will
show a flashing code and the RE-
SET and icons will appear (si-
multaneously or otherwise).
− For the description of the fault and
to reset the starting conditions see
the section “Resetting the faults”.
9
After a “safety stop”, wait about 10
seconds before restoring the start-up
conditions.
9
9