Adjust the dispenser to the crockery used
Rieber GmbH & Co. KG
19
7 Adjust the dispenser to the crockery used
7.1 Pipe dispenser R …
1 Adjustment rod
2 Spring clip
3 Dispenser pipe
4 Bottom hole
Adjustment of pipe dispenser, round RR … to crockery diameter
Apply parking brake and unplug mains plug.
Take out dispenser pipe (3).
Using a tool, loosen the spring clip (2). Lift up adjustment rod (1) and move as required.
Fix adjustment rod (1) in bottom hole (4). All adjustment rods must be fixed in the corresponding
hole.
▌
Between the adjustment rods (1) and plates, there should be a continuous gap
of 2 to 5 mm in order to compensate for crockery tolerances.
1
2
3
4