Adjust the dispenser to the crockery used
22
Rieber GmbH & Co. KG
Adjusting the pipe to the weight of the crockery
WARNING!
Risk of injury if pipes are adjusted incorrectly. When plates are removed from a stuck
stack, the other plates might shoot out.
The springs are provided with an open eye on the one side and a closed eye on the
other side. When installing the springs, ensure that the open side always faces up.
Otherwise, the springs may loosen during operation.
►
Carry out the setup work correctly.
►
Ensure that the open side of the spring always faces up.
See illustration at beginning
Place the empty pipe on a level surface.
Put approx. 20 plates into the pipe.
▌
Spring adjustment is ideal if approx. 3 to 6 plates project over the edge of the
pipe.
If more plates project, remove the springs again.
If too few plates project, install springs.
After adjustment of the pipes, reinstall them in the dispenser carefully.
