Fault - What now?
Rieber GmbH & Co. KG
29
9.6 Clean and service plastic parts
NOTE
Improper cleaning can cause damage to the surface.
►
Clean the appliance with a
mild
detergent diluted in hot water. After cleaning, rub
surfaces dry with a
soft cloth
.
9.7 Dry the appliance to keep it ready for next use
Dry the appliance. Allow residual moisture to escape.
Store appliance at room temperature.
10 Fault - What now?
DANGER!
Danger of electric shock. Dangerous electrical voltage.
►
Do not use defective appliances, put it out of service.
►
Disconnect the connecting plug on the unit before starting repair work.
►
Have all electrical repairs carried out by an authorised electrician only.
Fault
Possible cause
Possible remedy
Indicator lamp not on
Device not connected correctly
Check connection /
connectors.
#
User
No power supply
Check existing fuse.
#
Qualified electrician
Temperature not controllable
Temperature controller defective
Repair
#
Qualified electrician
Appliance has overheated
Built-in adjustment pipe type
ERRV-H..., ERE-H
or heated plate dispenser
heats up too much
Capillary tube of temperature sensor
is defective.
Sensor not fixed properly.
Do not touch nor move the
appliance.
Disconnect appliance from
power supply, switch off
existing circuit breakers/fuses
in switchbox.
Repair
#
Qualified electrician
Plug / spiral cable / rocker
Repair.