Rieber ERR Series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 32

Rieber ERR Series Скачать руководство пользователя страница 31

Warranty and liability

Rieber GmbH & Co. KG

31

See page 19

Customer service, spare parts

IMPORTANT

Customer service needs information about the type and number of the appliance.

If you have a fault you cannot remedy yourself, please get in touch with your Rieber partner or

Rieber central customer service.

Disposing of your product

Your appliance is made of high-quality material which can be reused / recycled. For disposal,
disconnect the appliance from mains supply. Unplug the mains plug. Cut off the cable directly
at the casing. Dispose of this product properly via your local disposal facility.

11 Warranty and liability

Manufacturer liability and warranty shall no longer apply if

•

••

•

the information and instructions in this user guide were not followed,

•

••

•

the product was not used as per the specifications,

See chapter "Intended use"

•

••

•

conversions or functional modifications were made,

•

••

•

non-original spare parts were used.

The "Sales and delivery terms and conditions" of Rieber GmbH & Co. KG shall apply for all warranty
claims made against the manufacturer.

The following wearing parts are not included in the warranty:

•

••

•

Caster

•

••

•

Caster with parking brake

•

••

•

Corner bumper

•

••

•

Springs

«
...
29
30
31
32
»

Содержание ERR Series

































Отзывы:

Нет отзывов