background image

4

WARRANTY

LIMITED 3 YEAR ENGINE WARRANTY FOR RIDGID

®

 PRESSURE WASHERS

Limited Manufacturer’s Warranty from Subaru Robin

(Effective with engines purchased from Robin America, Wood Dale, IL, after November 15, 1993)
Robin America, Inc., a division of Fuji Heavy Industries, Ltd. (herein “Robin”), warrants that each new engine sold by it will be 
free, under normal use and service, from defects in material and workmanship for a period listed below from the date of sale 
to the original retail purchaser. Robin’s obligation under this Limited Warranty shall be limited to the repair and replacement, 
at Robin’s option, of any part or parts which upon examination is/are found, in Robin’s judgment, to have been defective 
in material or workmanship. It shall be a condition of Robin’s obligation under this Limited Warranty that Robin, directly or 
through one of its Distributors or Service Centers authorized to service the particular engine involved, receive prompt notice 
of any warranty claim and that the engine or the part or parts claimed to be defective be promptly delivered, transportation 
prepaid, to such Distributor or Service Center for inspection and repair. All repairs qualifying under this Limited Warranty 
must be performed by Robin or one of its authorized Distributors or Service Centers.

WARRANTY PERIODS:
   Subaru 

Robin Four-Cycle, Air-cooled, Gasoline Engines on 

RIDGID

®

 Pressure Washers - Limited 3 year warranty

    (SP/EX/EH Series)
  (SP series engines only: 3 year Warranty Non-Commercial Use, 1 year Commercial Use)

The repair or replacement of any part or parts under this Limited Warranty shall not extend the term of the engine warranty 

beyond the original term as set forth above.
LIMITATIONS AND EXCLUSIONS: This Limited Warranty shall not apply to:

 1. Bent  or  broken  crankshaft  or  resultant  damage  caused  by  vibration  related  to  a  bent  or  broken  crankshaft 

Also, damage caused by loose engine mounting bolts or improper or imbalanced accessories or blades mounted to the 
crankshaft.

 . Repairs required because of prolonged storage including damage caused by old or contaminated fuel in the fuel tank, fuel 

lines or carburetor, sticky valves or corrosion and rust of engine parts.

 3. Repair required due to overheating. (Most often caused by overloaded or clogged or damaged or missing flywheel, fan, 

inlet air passages, cooling fins, or air shrouds.)

 4. Dirt or grit related wear caused by improper air cleaner maintenance (most often resulting in worn piston, piston rings, 

cylinders, valves, valve guides, carburetor, or other internal components).

 5. Broken or scored parts caused by low oil level, dirty, or improper grade of oil.
 6. Engine tune-ups and normal maintenance service including, but not limited to, valve adjustment, normal replacement of 

service items, fuel, and lubricating oil, etc.

 7. Any engine which has been subject to negligence, misuse, accident, misapplication, or overspeeding.
 8. Any engine that has been installed, repaired, or altered by anyone in a manner which in Subaru Robin’s sole judgment 

adversely affects its performance or reliability.

 9. Any engine which has been fitted with or repaired with parts or components not manufactured or approved by Subaru 

Robin which in Subaru Robin’s sole judgment adversely affects its performance or reliability.

 10.  Instances when normal use has exhausted the life of a component or an engine.
The customer is responsible for all transportation charges in connection with any warranty work.
Robin reserves the right to modify, alter, or improve any engines or parts without incurring any obligation to modify or replace 
any engine or parts previously sold without such modification, alternation, or improvement.
No person is authorized to give any other warranty or to assume any additional obligation on Subaru Robin’s behalf unless 
made in writing and signed by an officer of Subaru Robin.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or con-
sequential damages, so the above limitation(s) or exclusion(s) may not apply to you. This warranty gives you specific legal 
rights and you may also have other legal rights which vary from state to state.
THIS WARRANTY, AND SUBARU ROBIN’S OBLIGATION HERE UNDER, ARE IN LIEU OF ANY OTHER WAR-
RANTIES OR OBLIGATIONS OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTIES OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE.  THERE  ARE  NO  WARRANTIES  WHICH 
EXTEND  BEYOND  THE  DESCRIPTION  ON  THE  FACE  HERE-OF.  ROBIN  SHALL  IN  NO  EVENT  BE  LIABLE 
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

Rely on Subaru Robin Reliability!

Содержание RD80746



























Отзывы: