background image

WARRANTY

a) The  warranty  period  begins  on  the  date  the  engine  is  

delivered to an ultimate purchaser or first placed into service. 

The warranty period is two years.

b) Subject  to  certain  conditions  and  exclusions  as  stated 

below, the warranty on emissions related parts is as fol-

lows: 

  (1) Any warranted part that is not scheduled for replace-

ment as required maintenance in your owner’s manual 

is warranted for the warranty period stated above. If 

the part fails during the period of warranty coverage, 

the part will be repaired or replaced by FUJI accord-

ing to subsection (4) below. Any such part repaired 

or replaced under warranty will be warranted for the 

remainder of the period.

  () Any warranted part that is scheduled only for regular 

inspection in your owner’s manual is warranted for the 

warranty period stated above. Any such part repaired 

or replaced under warranty will be warranted for the 

remaining warranty period.

  (3) Any warranted part that is scheduled for replacement 

as required maintenance in your owner’s manual is 

warranted  for  the  period  of  time  before  the  first 

scheduled replacement date for that part. If the part 

fails  before  the  first  scheduled  replacement,  the 

part will be repaired or replaced by FUJI according 

to subsection (4) below. Any such part repaired or 

replaced  under  warranty  will  be  warranted  for  the 

remainder of the period prior to the first scheduled 

replacement point for the part.

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT  

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and Fuji Heavy Industries Ltd. (herein “FUJI”) are pleased to explain the emission control 

system warranty on your small off-road engine (SORE). In California, new SOREs must be designed, built, and equipped to 

meet the State’s stringent anti-smog standards. FUJI must warrant the emission control system on your SOREs for the periods 

of time described below, provided there has been no abuse, neglect or improper maintenance of your SOREs.
Your emissions control system may include parts such as the carburetor or fuel-injection system, fuel lines, and the ignition 

system. Also included may be hoses, clamps, connectors and other associated components.

Where a warrantable condition exists, FUJI will repair your small off-road engine at no cost to you including diagnosis, 

parts, and labor.

MANUFACTURER’S WARRANTY COVERAGE:

This emissions control system is warranted for two () years. If any emission related part on your engine is defective, the part 

will be repaired or replaced by FUJI.

OWNER’S WARRANTY RESPONSIBILITIES:

- As the SORE owner, you are responsible for the performance of the required maintenance listed in your Owner’s Manual. 

FUJI recommends that you retain all receipts covering maintenance on your SORE, but FUJI cannot deny warranty solely 

for the lack of receipts.

- As the SORE owner, you should, however, be aware that FUJI may deny you warranty coverage if your SORE or a part has 

failed due to abuse, neglect, or improper maintenance, or unapproved modifications.

- You are responsible for presenting your SORE to a distribution center or service center authorized by ROBIN AMERICA Inc., 940 

Lively Blvd., Wood Dale, IL 60191 (herein ROBIN AMERICA) as soon as a problem exists. The warranty repairs should be completed in  

a reasonable amount of time, not to exceed 30 days.

If you have a question regarding your warranty coverage, you should contact the Robin America Inc. Customer Service De-

partment at 1-630-350-800.

GENERAL EMISSIONS WARRANTY COVERAGE

- California Only -

FUJI warrants to the ultimate purchaser and each subsequent purchaser that the SORE (1) has been designed, built, and 

equipped so as to conform with all applicable regulations; and () is free from defects in materials and workmanship that cause 

the failure of a warranted part to conform with those regulations as may be applicable in the terms and conditions stated below.

  (4) Repair or replacement of any warranted part under 

the warranty provisions herein must be performed at a 

warranty station at no charge to the owner.

  (5) Notwithstanding the provisions herein, warranty ser-

vices or repair will be provided at all of our distribution 

centers  that  are  franchised  to  service  the  subject 

engines.

  (6) The owner must not be charged for diagnostic labor 

that leads to the determination that a warranted part 

is  in  fact  defective,  provided  that  such  diagnostic 

work is performed at a warranty station.

  (7) FUJI is liable for damages to other engine components 

proximately caused by a failure under warranty of any 

warranted part.

  (8) Throughout the engine warranty period stated above, 

FUJI will maintain a supply of warranted parts sufficient 

to meet the expected demand for such parts.

  (9) Any replacement part may be used in the performance 

of any warranty maintenance or repairs and must be 

provided without charge to the owner. Such use will 

not reduce the warranty obligations of FUJI.

 (10) Add-on or modified parts that are not exempted by the 

Air Resources Board may not be used. The use of any 

non-exempted add-on or modified parts by the ulti-

mate purchaser will be grounds for disallowing a war-

ranty claims. FUJI will not be liable to warrant failures of  

warranted parts caused by the use of a non-exempted 

add-on or modified part.

Содержание RD80746



























Отзывы: