9
ASSEMBLY
WARNING:
If any parts are damaged or missing do not oper-
ate this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
ATTA
CHING THE FRONT SUPPORT
See Figure 2.
Lift the machine and slide the front support into the front
tubes.
Push the screw into the holes in the front tubes. Tighten
securely using the hex nuts.
ATTACHING THE WHEEL ASSEMBLY
See Figure 2.
Locate the axle, hitch pins, washer, and wheels. Remove
the hitch pin from the axle.
Slide the axle through the hole in the center of the
wheel.
Slide the washer onto the axle.
Lift the machine and slide the axle into the wheel mount-
ing hole in the machine base as shown.
Push the hitch pin into the hole on the end of the axle to
secure the wheel assembly.
NOTE:
The hitch pin should be pushed into the axle until
the center of the pin rests on top of the axle.
Repeat with the second wheel.
ATTACHING THE TRIGGER HANDLE REST
See Figure 3.
Locate the trigger handle rest (front and back), screws,
and lock nut.
Push the screws into the holes. Tighten securely using
the lock nut.
Fig.
Fig. 3
HITCH
PIN
AXLE
wASHER
wHEEL
SCREw
HEX
NuT
TRIGGER HANDLE
REST (BACK)
SCREw
LOCK
NuT
fLAT
wASHER
SCREw
