15
OPERATION
WASHING WITH DETERGENT
See Figures 17 - 18.
Use only detergents designed for pressure washers; house-
hold detergents, acids, alkalines, bleaches, solvents, flam-
mable material, or industrial grade solutions can damage
the pump. Many detergents may require mixing prior to use.
Prepare cleaning solution as instructed on the solution bottle.
Remove the cap from the detergent bottle and pour
detergent in the container. Replace the cap on container.
Turn the dial to the left (rear tank).
Install the Dual Power Soap Nozzle on the spray wand.
Spray the detergent on a dry surface using long, even,
overlapping strokes. To prevent streaking, do not allow
detergent to dry on the surface.
NOTE:
To use a detergent bottle, secure bottle using the
bungee strap. Remove the cap from the detergent bottle.
Place the injection hose in the bottom of the bottle. Turn the
dial to the right (front bottle).
For long range detergent application:
With the Dual Power Soap Nozzle installed on the spray
wand and the engine turned off, pull the nozzle up until it
clicks into place.
For short range detergent application:
With the Dual Power Soap Nozzle installed on
the spray
wand and the engine turned off, push the Dual Power Soap
Nozzle down as far as it will go.
DETERGENT
BOTTLE
INjECTION
HOSE
Fig. 17
Before shutting off the engine:
Place
the injection hose in a bucket of clean water.
Flush for 1 - minutes (spray clear water through the
spray wand).
Shut off the engine
.
NOTE:
Shutting
OFF ( O )
the engine will not relieve pressure
in the system. Pull trigger to release water pressure.
Fig. 18
LONG
RANGE
SHORT
RANGE
DIAL
