background image

8

FEATURES

KNOW YOUR PRESSURE WASHER

See Figure 1.

The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before 
use  of  this  product,  familiarize  yourself  with  all  operating 
features and safety rules

.

DETERGENT DIAL

Turn the detergent dial left to use the built-in detergent con-
tainer or right when using detergent bottles.

ENGINE SWITCH

The  engine  switch  is  used  in  combination  with  the  recoil 
starter grip to start the engine. It is also used to turn the 
engine off.

FUEL TANK

This  fuel  tank  has  a  maximum  capacity  of  0.95  gal.  Use  
unleaded automotive gasoline in the engine.

HOSE STORAGE

Once the high pressure hose is rolled, hang it on the front of 
the machine using the hook and loop strap for convenient 
storage.

RECOIL STARTER

The recoil starter is pulled to start the mac

hine

.

DUAL POWER SOAP NOZZLE

The Dual Power Soap Nozzle can be easily adjusted for long 
range or short range cleaning. 

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor. 
In some areas it is illegal to operate an engine without a spark 
arrestor. A spark arrestor is available by calling customer 
service for assistance. 

SUBARU

®

 ENGINE

This SP170 Subaru engine enables the pressure washer to 
achieve 3,000 psi.

THERMAL RELIEF VALVE

This  pump  feature 

will  prevent  water  temperatures  from  

reaching harmful levels by releasing a small amount of wa-
ter. Once the water has cooled, the thermal relief valve will 
reset itself.

TRIGGER HANDLE

The trigger handle has a gripping surface that provides added 
cont

rol of the spray wand and helps reduce fatigue.

TRIGGER WITH LOCK OUT

Pulling  the  trigger  releases  a  stream  of  water  for  high  
pressure cleaning. The lock out provides protection against 
unauthorized use.

UNPACKING

This product requires assembly.

  Carefully cut the box down the sides then remove the 

tool and any accessories from the box. Make sure that 
all items listed in the packing list are included.

 

NOTE:

 This tool is heavy. To avoid back injury, lift with 

your legs, not your back, and get help when needed.

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

  If  any  parts  are  damaged  or  missing,  please  call 

1-866-539-1710 for assistance.

ASSEMBLY

PACKING LIST

Press

ure Washer

Trigger Handle Rest (front and back)
Screw ()
Lock Nut

Flat Washer

Front Support
Screw ()
Hex Nut ()
30 ft. High Pressure Hose
Auxiliary Handle
Trigger Handle
Spray Wand
Nozzle Holder (with Quick-Connect Nozzle (3) and 

Dual  

    Power Soap Nozzle)
Nozzle Cleaning Tool
Wh

eel ()

Washer ()

Axle ()
Hitch Pin ()
4-Cycle Engine Oil (SAE30 or SAE 10W30)
Operator’s Manual

Содержание RD80746



























Отзывы: