124
Ti-P1 Training
Slide 124
TM (ID) Sensor
Below the image transfer belt [1], there are two TM (ID) (Toner Mark)
sensors.
These are used for MUSIC. They also act as ID sensors for use during
process control and IBACC.
Note that the sensor seen on the left [A] (as viewed from the front of the
machine) is called the right TM (ID) sensor (TM sensor: R), and the one on
the right [B] is called the left TM (ID) sensor (TM sensor: L).
This will be important when we replace the TM (ID) sensors.
Sensors can be replaced individually (the service part consists of one
sensor).
No additional notes
