3 December 2004
DETAILED FUNCTIONS
6-9
D
etailed
D
escr
iptions
Double-sided originals
– Front side –
•
An original is fed to the exit sensor in
the same manner as for the single-sided
scanning mode.
– Rear side –
•
When the exit sensor [A]
detects the trailing edge of an
original, the exit roller [C]
turns in reverse.
•
The junction gate [B] closes
because of its weight after the
original goes past it.
•
Because of this, when the exit
roller feeds the original, it
goes up to the registration
roller.
•
After skew is corrected, the
roller [G] is pulled away from
the exit roller [C] by the exit
roller release solenoid.
•
The roller [G] is moved into contact with the exit roller [C] again by the exit roller
release solenoid when the read sensor [I] detects the trailing edge of the original.
•
When the exit sensor [H] detects the trailing edge of the original, the original is
sent again to the exit tray through the scanner, past the registration roller [D],
first [E], second transport roller [F] and exit roller [C] without scanning at this
time.
•
This ensures that the original will be correctly stacked front side down in the exit
tray.
G422D103.WMF
G422D104.WMF
[A]
[B]
[C]
[G]
[H]
[I]
[D]
[E]
[F]
