MAINFRAME AND OPTION INSTALLATION PROCEDURES
3 December 2004
1-6
8. Set the cross bar [A] on the end of the lower
stand. Then secure them with M4x8W
screws (
!
x 4).
NOTE:
Turn the adjuster screws [B] to
adjust the rack to level.
9. Set the table board [C] from above the rack
10. Secure the rack with table board [C]. Insert
the M4×8W screws (
!
x 6) to the screw holes
on the back of the table board.
NOTE:
Change the height of the table board
[C] by securing the screw holes on
the front side of the stand. There are
8 screw holes to adjust the height of
the table board.
G422I214.WMF
G422I205.WMF
G422I206.WMF
G422I215.WMF
[A]
[B]
[B]
[C]
[C]
[C]
