74
Sirius-PJ1Training
Slide 74
Writing Data to New Boards
Data Writing After Replacing the Main Board - 11
The procedure on the previous slide copies the following
data (which is from the old board) to the new board:
Flicker Data
VT Data
Uniformity Data
Color Correction Data
Multi Data
Usage Time Data
If data reading from the old board failed, you are only able
to input the flicker data and the usage time data.
The next few slides explain how to input the flicker data
and usage time data in this situation.
These two items must also be input after you replace the
OPT BASE.
VT Data, Uniformity Data, Color Correction Data, Multi Data were input
automatically when you used PJupgrader2 (see Data Writing After Replacing the
Main Board – 4).
