76
Sirius-PJ1Training
Slide 76
Writing Data to New Boards
Data Writing After Replacing the Main Board – 13
Select ‘Floor’.
Display the Red raster signal by clicking ‘Test R’ in the Test
Pattern box. Adjust the R-scroll bar so that the flicker in the
middle of the window becomes as small as possible.
Do the same for Test G, then Test B.
When the adjustment is done, click ‘Set’ to write the new value to
the projector
If you need to restore the data to the state before the adjustment,
click the ‘Reset’ button.
The values displayed by the side of each scroll bar show the original value to the
left of the arrow, and the current value to the right of the arrow.
