Ricoh Neptune-P1, Руководство по обслуживанию

Страница: 368 / 457

• When the length count reaches "99,999,999" in the "Low" field (8 digits), for
example, after the next the count will show "1" in the "High" field and "00 000
000" in the "Low". Multiply the "1" in the "High" field by: 1) 10
8
" (100,000,000
mm), 2) 10
5
(100, 000 m) or 3) 10
2
(100 kilometers) to determine the accurate
count.
• When several documents are merged for a print job, the number of pages s to red are counted for
the application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following pages
are not counted as printed pages:
• Blank pages in a duplex printing job.
• Blank pages inserted as document covers, chapter title sheets, and slip sheets.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a jam.
8411 Prints/Duplex
This SP counts the amount of paper (front/back counted as 1 page)
used for duplex printing. Last pages printed only on one side are not
counted.
[0 to 9999999/ 0 / 1]
8421
T:PrtPGS/Dup Comb [0 to 9999999/ 0 / 1]
These SP's count by binding and combine, and n-Up settings the number of pages
processed for printing. This is the total for all applications.
8424
P:PrtPGS/Dup Comb [0 to 9999999/ 0 / 1]
These SP's count by binding and combine, and n-Up settings the number of pages
processed for printing by the printer application.
8427
O:PrtPGS/Dup Comb [0 to 9999999/ 0 / 1]
These SP's count by binding and combine, and n-Up settings the number of pages
processed for printing by Other applications
842x 1 Simplex> Duplex
842x 4 Simplex Combine
SP8-xxx Data Log 2
367
5