Ricoh Neptune-P1, Руководство по обслуживанию

Страница: 264 / 457

6 Trans.: Mode1 [120 to 220/205/5
o
C]
7 Trans.: Mode2
[120 to 220/195/5
o
C]
8 Trans.: Mode3
9 Trans.: Mode4 [120 to 220/165/5
o
C]
10 Trans.: Mode5 [120 to 220/*/5
o
C]
11 Film: Mode1 [120 to 220/195/5
o
C]
12 Film: Mode2 [120 to 220/190/5
o
C]
13 Film: Mode3
[120 to 220/185/5
o
C]
14 Film: Mode4
15 Film: Mode5 [120 to 220/175/5
o
C]
16 Plain:Ltemp [120 to 220/195/5
o
C]
1932 TTemp:PreRol Target Temperature: Pressure Roller
Sets the target fusing temperature of the pressure roller for plain paper, translucent paper,
and film. These temperatures are used for pressure roller feedback. Turn the machine power
off/on after changing the settings.
Important:
• Modes "1" to "5" below refer to the paper type and thickness settings selected in User
Tools (see "Paper Thickness Default Selection" in this section).
• After adjusting these SP's, you must turn the machine power off/on.
1 Plain: Mode1 [60 to 80 /100/5
o
C]
2 Plain: Mode2 [60 to 80 /85/5
o
C]
3 Plain: Mode3
[60 to 80 /60/5
o
C] 4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1 [60 to 80 /130/5
o
C]
7 Trans.: Mode2 [60 to 80 /100/5
o
C]
8 Trans.: Mode3
[60 to 80 /60/5
o
C]
SP1-xxx Feed
263
5