Ricoh G148, Руководство по обслуживанию

Страница: 324 / 537

2115 [Beam Pitch Adjus] Main Scan Beam Pitch Adjustment
A label attached to the LD unit service part lists the correct settings. Refer to these settings when
adjusting the beam pitch for LD0 to LD3.
001 Pitch Adjustment Between LD0 and LD1 [0~999/1]
002 Pitch Adjustment Between LD0 and LD2 [0~999/1]
003 Pitch Adjustment Between LD0 and LD3 [0~999/1]
2201 [Dev. Bias Adjustm] Development Bias Adjustment
001 Dev. Bias (Image)
Adjusts the development bias for copying when process control is off
[-900 to –100/10 V]
Adjust as a temporary measure to compensate for an aging drum until the old drum can be
replaced.
002 ID Sensor Pattern
Adjusts the development bias used to create the ID sensor pattern. DFU
[[-900 to –100/10 V]
This SP and SP2201-004 must be changed together by the same amount.
003 OHP
Adjusts the development bias for copying with OHP sheets.
[-900 to –100/10 V]
004 ID Sensor Pattern Dev. Potential
Adjusts the development potential to create the ID sensor pattern. DFU
[-380 to -140/10 V]
This SP and SP2201-002 must be changed together by the same amount.
005 Vb Scale Voltage Setting
Sets the Vb target development bias voltage (Vb). DFU
[-900 to -100/10 V]
2207 [Forced Toner Sup] Forced Toner Supply
Service Program Mode Tables
323
5