Ricoh B286, Руководство по обслуживанию

Страница: 204 / 622

SP Adjustments
B286/B289 3-76 SM
Step 10: Scanner Registration
1. Use the A1 LEF Test Chart to make a 1:1 copy on plain A1 LEF paper.
2. On the copy, measure the gap between the chart image and the leading edge and left
edge.
3. Adjust these SPs if necessary:
SP Standard Comments
4010-1 ±3 mm Scanner Sub Scan Reg – Leading Edge
4011 ±2.8 mm Scanner Main Scan Reg
Step 11: Printer: Cut Length
The following SPs are necessary for this step:
SP
1920-111 Cut Length Adjustment-1
st
Roll:297 mm (11” or 12”):Plain Paper
1920-115 Cut Length Adjustment-1
st
Roll:1189 mm (44” or 48”):Plain Paper
1920-211 Cut Length Adjustment-2
nd
Roll:297 mm (11” or 12”):Plain Paper
1920-215 Cut Length Adjustment-2
nd
Roll:1189 mm (44” or 48”):Plain Paper
! The cut length adjustment is done for all paper sizes after these settings are done.
! After these settings are done you may still need to do fine adjustments for each
paper size.
! SP1920-1 to 238 (Cut Length Adjustment)
1. Use the Preset Cut feature to make standard cuts of plain paper for these sizes:
Size Orientation
A3 Sideways
A1 Lengthways