Ricoh B286 Скачать руководство пользователя страница 113

Страница: 113 / 622

Installation of MFP Options

SM 1-77

B286/B289

Inst

allation

16. Turn the machine power off/on.

Do not remove the SC card from Slot C3.

17. Open the Browser screen from the “Extended Feature Settings” in User Tools.

A message appears if the installation was successful: “The MFP Browser was

successfully installed.”

18. Turn the main machine off.

19. Remove the SD card for the Browser unit from Slot 2 or 3, then reattach the SD card

slot cover.

20. On the operation panel remove the dummy keytop and replace it with the “Others”

keytop.

1.7.13 VM CARD TYPE E (D338-01, -02, -03)

Accessories

Check the accessories and their quantities against the table below.

Description

Qt’y

VM Card

Decal 1

Installation

Before doing the procedure, turn off the main power switch and unplug the

machine from its power source.

1. Remove SD card slot cover (

x1).

2. Insert the SD card into SD card slot 2 or 3.

Содержание B286















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание B286

Отзывы:

Бренды по названию

Популярные бренды

Ricoh B286, Руководство по обслуживанию

Результаты поиска

Содержание B286

Отзывы:

Бренды по названию

Популярные бренды