Ricoh B286, Руководство по обслуживанию

Страница: 517 / 622

Scanner
SM 6-9 B286/B289
Det
ails
Original exit rollers [F]: Feed the original out while the scanned image is processed
Upper output tray [G]: Receives the original after scanning. Long originals will curl in the
tray.
!
If the original output trays are removed, the original feeds in a straight path, out of
the rear of the machine. The original feed path through the machine is the same.
! The user should remove the original output trays when scanning thick originals so
the original will feed straight out.
Scanner motor [H]: Controls the original feed roller and original exit roller. (See section
6.2.4 “Original Drive Mechanism.”)
6.2.2 SCANNER LAYOUT
[A]: Original Width Sensors. Detect the width of the original.
[B]: Original Set Sensor. Detects when the original is put on the original feed table.
[C]: Original Feed Roller. Feeds the original to the original registration sensor.
[D]: Original Registration Sensor. Detects the leading edge of the original and stops feed
temporarily for the user to align the original manually.
[E]: CIS. Scans the original and sends the image data to the VDB.
[F]: Original Exit Sensor. Detects the leading and trailing edge of the original for job timing.
[G]: Original Exit Roller. Feeds the original out of the machine.