Ricoh Aficio SP C400DN, Руководство пользователя

Страница: 273 / 608

Using as the NetWare Print Server/Remote Printer
49
1
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
Important
❒
In an IPv6 environment, Netware servers cannot be used.
A
In the [ Printers ] or [ Printers and Faxes ] window, open the printer properties.
B
Click the [ PostScript ] tab.
When using Windows 2000/XP or Windows NT 4.0, click the [ Device Settings ]
tab, and then proceed to step to clear the check box.
C
Click [ Advanced ] .
D
Clear the [ Send CTRL+D before job ] and [ Send CTRL+D after job ] check boxes, and
then click [ OK ] .
E
Click [ OK ] to close the printer properties dialog box.
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the print-
er driver on Windows. If NetWare form feed is configured, the printer may not
print properly.
Follow the procedure below to disable form feed according to the operating sys-
tem used:
• Under Windows 95/98/Me, clear the
[ Form feed ]
check box on the
[ Printer Set-
tings ]
tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear
the
[ Form feed ]
check box on the
[ NetWare Settings ]
tab in the printer properties
dialog box.
Banner Page
Do not use NetWare to configure a banner page.
Follow the procedure below to disable banner pages according to the operating
system used:
• Under Windows 95/98/Me, clear the
[ Enable banner ] check box on the [ Printer
Settings ] tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear
the
[ Enable banner ]
check box on the
[ NetWare Settings ]
tab in the printer prop-
erties dialog box.