Ricoh Aficio SP 5100N, Руководство по обслуживанию

Страница: 127 / 175

EDC (Engine Diagnostic Control) Mode
SM 5-9 G186
Service
Ta
bles
Usage
1. Press the arrow keys "
'
/
(
" until "Component Test / 5.Fuser Ctrl" message is
displayed on the panel.
2. Press the "OK" key.
3. Press the arrow keys "
'
/
(
" to find a desired function (Refer to the table below).
4. Press the "OK" key.
5. Press the "OK" key to execute the function or the "Back" key to return to the previous
step.
Function Name Description Display (LCD) Remarks
Fuser Bias
The bias will have the
previously saved value.
Fuser Bias
[ON] / [OFF]
Temp Control
The fuser unit will control
the power for fixing and
display the current
temperature on the panel.
The target temperature is
160°C.
Temp Control
[OFF] / [ON] [xxx]
[xxx] is a current
temperature.
Fuser Temp
The ADC will be displayed
on the panel.
Fuser Temp [xxx] [xxx] is it’s ADC.
Inner Temp
The ADC will be displayed
on the panel.
Inner Temp [xxx] [xxx] is it’s ADC.
ƒ The procedure and content above may vary, depending on the situation.
5.2.9 LSU
These functions are to check a current state (normal or not) of the Laser Scanning Unit.
Usage
1. Press the arrow keys "
'
/
(
" until "Component Test / 6.LSU Control" message is
displayed on the panel.
2. Press the "OK" key.
3. Press the arrow keys "
'
/
(
" to find a desired function (Refer to the table below).