Ricoh Aficio SP 5100N, Руководство по обслуживанию

Страница: 113 / 175

Causes and Solutions of Software Errors
SM 4-27 G186
Tr
ouble
-
shooting
may still fail to work with a particular
program. In such cases, install the new
driver again. If not working in basic
MS-Windows programs, then check to
see if the CMOS port is on ECP. Also
check the address of IRQ 7 and 378.
4. If the scanner needs to be connected
to the printer, first remove the scanner
from the PC to see if the printer is
properly working alone.
4.5.2 THE PRINTER IS NOT WORKING (2)
Description:
After receiving a printing order, response is slow or nonexistent due to wrong setup rather
than a malfunction of the printer itself.
Check and Cause Solution
1. Secure more space of the hard disk.
2. Printing error occurs even if there is
enough space on the hard disk.
3. Check parallel-port-related items in the
CMOS Setup.
4. Reboot the system to print.
1. Not working with the message
'insufficient printer memory' indicates
an HDD space problem rather than a
RAM problem. In this case, provide
more space on the hard disk. Secure
more space using disk utilities, etc.
2. The connection of the cable and printer
port is not proper. Check if the
connection is properly done and if the
parallel port in CMOS is properly set
up.
3. As a printer port, Select ECP or SPP
out of SPP (Normal), ECP, and EPP
modes. SPP normal mode supports
8-bit data transfer, while ECP Mode
transfers 12-bit data.