Troubleshooting
119
The color of the printout is differ-
ent from the color on the com-
puter display.
Toner based color settings under the printer driver produce
unexpected printout colors.
Changing color settings using the printer driver produces un-
expected printout colors.
See the printer driver Help.
The image is printed in the
wrong orientation.
The feed direction you selected and the feed direction select-
ed in Option Setup of the RPCS
TM
printer driver may be con-
flicting. Make the proper settings.
Color registration shifts when
printing in color on thick paper.
Press
{
Menu
}
, and then select Color Regist. from the Mainte-
nance menu.
See
p.80 “Adjusting the Fuser for Thick Paper”
.
The control panel error mes-
sage stays on after removing
the misfed paper.
Open the front cover of the printer, and then close it.
The print image is not clear.
Due to sudden temperature change, condensation might ap-
pear inside the printer, reducing print quality. If you move the
printer from a cold room to a warmer room, do not use until it
acclimatizes to the temperature.
The print side of pages is hazy
gray.
Adjust image density.
To adjust image density, press
{
Menu
}
, and select Image
Density from the Maintenance menu.
See
p.92 “Adjusting Image Density”
.
If paper is curled, correct it.
Curled or folded paper might result in hazy gray print. Curling
often occurs with postcards, so be sure to correct it before
printing.
Printed images are different to
computer screen images.
When you use certain functions, such as enlargement and
reduction, image layout might be different from that displayed
on the computer screen.
You might have selected to replace True Type fonts with
printer fonts in the printing process.
To print an image like that image on the computer screen,
make settings to print out True Type fonts as an image.
See the printer driver Help.
The printer does not print at
1200 dpi, even if 1200 dpi reso-
lution is selected.
Printing at 1200 dpi is memory intensive. Therefore, depend-
ing on memory capacity, you may not be able to print at 1200
dpi. Either add memory to the printer, or reduce the size of
data.
See “Memory Capacity and Paper Size”, Software Guide.
There are color differences in
color documents.
Press
{
Menu
}
, and then select Color Regist. from the Mainte-
nance menu.
See
p.79 “Adjusting the Color Registration”
.
Problem
Possible causes and solutions
Содержание Aficio C7528n
Страница 35: ...Paper and Other Media 35 The initial screen appears ...
Страница 91: ...Adjusting the Printer 91 The initial screen appears ...
Страница 145: ...Removing Misfed Paper 145 M Put the output tray back into place Raise the tray N Lower it slowly ...
Страница 147: ...Removing Misfed Paper 147 D Remove the misfed paper E Close the upper cover F Attach the booklet finisher ...
