Rice Lake MSI-4260M, Техническое руководство

Страница: 15 / 38

Setup
© Rice Lake Weighing Systems ● All Rights Reserved 11
4.2 Function User Keys
4.2.1 Set Function Key
The MSI-4260M has one user definable key on the front panel, that can be programmed to one of several functions.
The additional function key is available on the optional RF Rugged Remote Control or RF remote display.
To set the function key use the following steps:
1. Press and hold and .

displays.

is on the MSI-4260M or the F1 key on the connected RF remote device and

would only be
the F2 key on the connected RF remote device.
2. Press . The current user key function displays.
3. Press to scroll through the available functions.
4. Press when the desired function displays.

displays.
5. Press .

displays, the unit exits setup and stores the settings.
Press at any time to cancel the procedure.
4.2.2 Test
To perform a test, press , which is configured to TEST . The device LCD segments and LED annunciators flash
momentarily as a display test. The display scrolls through the test parameters ( Table 4-2 ). Other internal tests are also
performed and if any test fails, an error code displays. See Section 7.1 on page 30 for information on error codes.
Single Step Through Test Procedure
1. Press within 2 seconds of test start to enable a single step mode.
2. Press to scroll through the available test parameters.
3. Press to start or display the individual tests.
4. Press to exist individual tests.
5. Press to exist from the test and return to weigh mode.
Parameter Description

Software – Displays the current weighing standard ( Section 5.6.1 on page 24 )

Standby – Displays current weighing standard ( Section 5.6.1 on page 24 ); Does not indicate Standby

Battery – Displays battery information

Display test – Tests the display of the unit; Every digit of the display flashes momentarily in order of 0–9 digits

Calibration – Displays current unit calibration
Table 4-2. Test Parameters
Note
Note