Rice Lake MSI-4260M, Техническое руководство

Страница: 33 / 38

Communications Setup
© Rice Lake Weighing Systems ● All Rights Reserved 29
802.15.4 RF Network Setup
The MSI-4260M uses three numbers to connect to an 802.15.4 piconet:
For printer and serial output setup, see the following information:
To enter the menu:
1. Press and at the same time.

displays ( Figure 6-1 on page 25 ).

may flash momentarily before entering the communications menu.
2. Press .

displays.
3. Press .

displays.
4. Press to scroll through parameters.
5. Press to enter parameter. The current value flashes.
6. With parameter displayed, press to select. The currently selected parameter flashes.
7. Press to scroll through settings.
8. Press .

displays.
9. Press . The current ID flashes.
10. Enter the ID using to scroll through numbers and to set number.
11. When ID is set, press again.

displays.
12. Press . The current channel flashes.
13. Enter the channel using to scroll through numbers and to set number.
14. When channel is set, press again.

displays.
15. Enter the network ID using to scroll through numbers and to set number.
16. When the ID is set, press again.

displays.
17. Press twice to save and exit to weighing mode.
Note